Putting Back Into Service After Storage; Parking Safely - GOLDONI MY SPECIAL SR Série Notice D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

GOLDONI S.p.A.
Putting back into service after
storage
Comply with the following instructions
before using the machine for the first time or
after a long idle period:
Make sure that the machine is not
damaged in any way.
Check the mechanical components,
which must be in a good condition with
no signs of rust.
Carefully grease all mobile parts.
Make sure that there are no oil leaks.
Check the engine oil level.
Check the transmission oil level.
Make sure that all the protections are in
their correct places.
EN Inglese

Parking Safely

Stop the machine on level ground, not
on a slope. Fit a chock under the
wheels if necessary.
Disengage
attachments.
Lower the implements to the ground.
Turn off the engine and if the ectrical
start is present, remove the ignition
key.
Wait until the engine and all moving
parts have stopped before you leave
the operator's station.
Close the fuel shut-off valve if the
machine
component.
80
MY SPECIAL SR
PTO
and
stop
is
equipped
with
the
this
SAFETY

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

06381212

Table des Matières