Changing The Basic Settings; Cleaning And Servicing; Dishwasher-Safe Components - Siemens EQ 500 integral Série Notice D'utilisation

en Cleaning and servicing
Setting
Coffee temp.
Languages
Autom. switch-off
Water hardness
Key tones
Factory settings
1
Depending on the appliance specifications
2
Factory setting (may vary according to model)

Changing the basic settings

Press
1.
Use or
2.
sired basic setting and press
a The display will show the setting
options and the navigation sym-
bols will light up. The display indic-
ates the current setting.
Use or
3.
sired selection and press
a The setting is now saved.
Use to go back.
4.
Press
5.
62
Selection
normal
high
max.
See options on the appliance.
See options on the appliance.
1 (soft)
2 (medium)
3 (hard)
4 (very hard)
Water-softening system
Key tones on
Key tones off
Full reset?
Continue: OK
Cancel: ←
⁠ .
to select the de-
to make the de-
⁠ .
to exit the menu.
2
2

Cleaning and servicing

Cleaning and servicing
To keep your appliance working effi-
ciently for a long time, it is important
⁠ .
to clean and maintain it carefully.

Dishwasher-safe components

Find out which components can be
cleaned in the dishwasher.
ATTENTION!
Some components are sensitive to
heat and may be damaged if they are
cleaned in a dishwasher.
Follow the operating instructions of
▶
the dishwasher.
Description
Set the temperature for coffee
drinks.
Note: The setting is effective for
all preparation types.
Set menu language.
Changes are immediately dis-
played.
Set how long the appliance
should wait after preparing the
last drink before automatically
switching itself off.
Set the appliance to the local
water hardness.
→ "Setting the water hardness",
Page 54
Switch the button tones on or
off.
Restore settings to the factory
settings.
Note: All individual settings will
be deleted and reset to the fact-
ory settings.