Changing Basic Settings - Siemens TK 91 N 01 Notice D'utilisation

en
Info: After it has cooled down, immediately
clean the nozzle 10. Dried residues are
difficult to remove. See section "Care and
daily cleaning".

Changing basic settings

The basic settings can be changed. To
enable this function, buttons
(small cup), (large cup),
e f
and (steam) are assigned additional
h
functions.
Button = Access to programming mode
h
Button = Selector button
g
for basic settings
Button = Selector button +
f
(in the basic settings)
Button = Selector button –
e
(in the basic settings)
Button = Score settings
a
The following basic settings can be
changed:
– Language
– Water hardness
– Power save
To program the appliance
Info: The appliance must be switched on.
● Keep steam button
least three seconds.
The programming mode is activated.
● By pressing the selector button
choose the desired setting in the display,
e.g.
Hardness/Level 3
● To change the setting, press button
or button + 4, e.g.
f
.
Level 2
● Press button once.
a
The changed setting is stored.
The display once again shows
18
(Stand by),
a
(hot water)
g
– Warming plate
– Rinse
– Reset
depressed for at
h
,
g
.
e
Hardness/
.
Ready
To change the language
Sprache/Deutsch
The following languages are available:
Deutsch
English
Français
Italiano
To change the water hardness
Hardness/Level 3
The following levels are available:
Level 1, 2, 3, 4 or –.
The setting – indicates that no water
hardness level is selected, which means
that the appliance does not automatically
alert the user when descaling is required.
Level Water hardness level
German (°dH) French (°fH)
– none
1 1-7
2 8-15
3 16-23
4 24-30
Power save
The economy mode can be changed from
Power save/On
Warming plate
The function of the warming plate 3 can
be switched from
Warmplate/Off
Descaling procedure
The functions
- 2
procedure
are required if descaling is to be
reset
performed, see section "Descaling".
Rinsing
The user can choose between two settings.
Automatic
automatically.
is preset.
Nederlands
Español
Português
Русский
is preset.
none
1-13
14-27
28-42
43-54
to
Power save/Off
Warmplate/On
.
Start descaling
and
Descaling alarm
= appliance is rinsed
.
to