Basic Operation; Playback; Basic Procedure; Using The Scene Function - Yamaha RX-V765 Mode D'emploi

BASIC OPERATION

Basic procedure

1
Turn on external components (TV, DVD
player, etc.) connected to this unit.
2
Rotate the RINPUT selector (or press the
eInput selection keys) to select an input
source.
The name of the selected input source is displayed for
a few seconds.
Input source name
AV1
y
• You can change the input source name displayed on the front panel
display or on the video monitor as necessary (see page 50).
3
Play the external component that you have
selected as the source input, or select a radio
station on the tuner.
Refer to the instruction manuals provided with the
external component for details on playback. For
selecting radio stations or playback of an iPod or
Bluetooth component using this unit, see the
following.
• FM/AM radio tuning (see page 31)
• Using iPod (see page 33)
• Using Bluetooth components (see page 35)
4
Turn the LVOLUME control to adjust the
volume (or press sVOLUME +/–).
Volume -18.5dB
24
En

Playback

Note
When you play back a DTS-CD, noise may be output in some
conditions, which may cause a speaker malfunction. Make sure
that the volume is set to low before starting playback. If noise is
output, do the following.
1) When only noise is output
If a DTS bitstream signal is not properly input to this unit,
only noise is output. Connect the playback component to this
unit by digital connection and play back the DTS-CD. If the
condition is not improved, the problem may results from the
playback component. Consult the manufacturer of the
playback component.
2) When noise is output during playback or skip operation
Before playing back the DTS-CD, display the OPTION
VOL.
menu after selecting the input source and set "Decoder
SW
C
L R
Mode" to "DTS" (see page 37).
SL SR

Using the SCENE function

This unit has four SCENE keys that allow you to change
input sources and sound field programs with one key. A
set of input source and sound program suitable for a
certain situation, such as playing back movies or music, is
assigned to each key by default.
BD/DVD
TV
CD
RADIO
y
• This unit turns on when MSCENE (or iSCENE) is pressed during
standby.
Volume • If a Yamaha DVD player that can receive SCENE control signals is
connected to the REMOTE OUT jack of this unit, the DVD player
VOL.
automatically turns on and starts playback when MSCENE (or
iSCENE) is pressed (see page 19). For details, refer to the instruction
SW
C
L R
manual of the DVD player.
SL SR
Selecting a SCENE
Press MSCENE (or iSCENE).
Input source Sound field program
HDMI1 Straight
AV1 Straight
AV3 Straight
TUNER 7ch Enhancer