Sony DXC-H10/OL Mode D'emploi page 75

PAGE 2/3 menu
PAGE 2/3
"WHT.BAL : AWB
R.PAINT: 0
B.PAINT: 0
C.TEMP : 3200
MAS.PED : 0
R.PED : 0
B.PED : 0
MATRIX : ON OFF
DETAIL : ON OFF
LEVEL : 0
Setting items on PAGE 2/3 menu
Menu item Contents of setting
WHT. BAL Selects the white balance modes.
R./B. PAINT Finely adjusts the white balance (AWB,
ATW).
R./B. GAIN Finely adjusts the manual white
balance.
C. TEMP Selects the color temperature according
to the lighting conditions.
MAS. PED Sets the pedestal level of the output
signal.
R./B. PED Finely adjusts the pedestal level.
MATRIX Enables or disables processing of a
color matrix.
DETAIL Enables or disables adjustment of the
sharpness of the image outline.
LEVEL Adjusts the sharpness of the image
outline.
ATW MANU
5600
Ref. page
21
21
22
22
22
22
23
23
23
WHT. BAL (white balance)
Selects the white balance modes.
Selection Function
AWB Use for automatic adjustment of the white balance
(auto white balance).
When this item is selected, R. PAINT and B. PAINT
are highlighted. Use these items for fine adjustment.
Adjust them while observing the monitor screen.
R. PAINT: Finely adjusts the red in the range from
–127 to +127.
B. PAINT: Finely adjusts the blue in the range from
–127 to +127.
For details, see "Adjusting the White Balance" on page 31.
Activates auto-tracing white balance. This mode is
ATW
suitable for shooting when the light source changes.
The white balance is automatically adjusted as the
color temperature changes.
When this item is selected, R. PAINT and B. PAINT
are highlighted. Use these items for fine adjustment.
Adjust them while observing the monitor screen. The
adjusted values are stored in other memory than AWB
values.
R. PAINT: Finely adjusts the red in the range from
–127 to +127.
B. PAINT: Finely adjusts the blue in the range from
–127 to +127.
21
Chapter 2 Operation (EN)