Sony DXC-H10/OL Mode D'emploi page 69

2
Move the cursor to the item to be set by pressing the
FUNCTION UP or DOWN button.
The cursor is beside the item that was selected last in
any menu page.
PAGE 1/3
"GAIN : OdB 6dB 12dB AGC
"SHUTTER : OFF STEP MANU
CCD - IRIS R.R
EXT.TRIG LTR
SPEED : - - -
AE MODE : MULTI AVERAGE
SPOT PEAK
LEVEL: 0
KNEE : HI LOW AUTO
IRIS : ON OFF
3
Change the value by pressing the DATA UP or DOWN
button.
Holding down the button changes the value quickly.
PAGE 1/3
"GAIN : OdB 6dB 12dB AGC
"SHUTTER : OFF STEP MANU
CCD - IRIS R.R
EXT.TRIG LTR
SPEED : - - -
AE MODE : MULTI AVERAGE
SPOT PEAK
LEVEL: 0
KNEE : HI LOW AUTO
IRIS : ON OFF
To reset to the initial set value
Select the item to be reset, then press the DATA UP and
DOWN buttons simultaneously.
For the initial set value on each item, see "Initial Setting
List" on page 28.
Cursor
To return to the regular monitor screen
Press the MENU button repeatedly until the menu-off screen
appears.
Setting item
Note
If you set SHUTTER to R. R, EXT. TRIG or LTR on the
PAGE 1/3 menu and turn off the camera, the picture will not
be displayed on the monitor screen when it is turned on
again. This indicates that the camera is waiting for an
external trigger signal input and is not a malfunction of the
camera. Check the setting of SHUTTER in cases where no
picture is displayed.
Set value
15
Chapter 2 Operation (EN)