Select one of the following sound pre-
u
sets with the rocker switch
•
"POP"
•
"ROCK"
•
"CLASSIC"
Switch the selected sound preset off
u
with the rocker switch
the rocker switch
Press the OK button
u
ferent function, or press the DIS•ESC
;
button
to exit the menu.
Notes:
•
Only one sound preset can be
switched on at any time. To activate
no sound preset, switch off the cur-
rently switched-on sound preset.
•
To obtain a perfect sound, the preset-
tings can be supplemented further
by the equalizer settings according to
personal preferences. If you change
the level setting for bass, treble or
middle, the selected sound preset is
switched off in the menu; but the oth-
er level settings of the sound preset
are retained.
Equalizer settings
Your device features a digital 3-band equal-
izer. It allows you to adjust the sound to your
vehicle and your personal preferences and
eliminate problems, such as droning or poor
voice comprehension.
:
or
:
:
or on with
:
.
2
to select a dif-
Which equalizer setting is the correct
one?
Sound
impression
Unclean bass,
droning, unpleasant
pressure
Very transparent,
aggressive sound,
no stereo effect
Muffl ed sound,
low transparency,
instruments do
not excel
Insuffi cient bass
Tip:
Insert a CD which you know very well if
you want to adjust the equalizer. First,
set the bass, treble, balance, and fad-
er to zero. For equalizer settings, first
change the settings of the mid-frequen-
cies, followed by those for treble and
fi nally bass.
The following table shows the expanded
setting options for bass (EBASS), treble
(ETREBLE), middle (EMIDDLE) and X-Bass
(EXBASS) that can be performed in the
Enhanced Audio menu.
Note:
The table does not contain all the set-
tings that are possible in the Enhanced
Audio menu.
Sound settings
Measure
Frequen-
Level
cy (Hz)
100–200
approx. –4
1000–
approx.
2500
–4 to –6
10000–
approx.
12500
+4 to +6
60–80
approx.
+4 to +6
51