FCC Information
FCC Information
This device complies with Part 15 of the
FCC Results. Operation is subject to the fol-
lowing two conditions:
1.
This Device may not cause harmful inter-
face, and
2.
This device must accept any interference
received, including interference that may
cause undesired operation.
Note: This equipment has been tested and
found to comply with the limits for CLASS
B digital device, pursuant to Part 15 of FCC
Rules. These limits are designed to provide
reasonable protection against harmful in-
terference when the equipment is oper-
ated in a commercial environment. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instruc-
tions, may cause harmful interference to
radio communications. However, there is
no guarantee that interference will not oc-
cur in a particular installation. If this equip-
ment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off
and on, the user is encouraged to try cor-
rect the interference by one or more of the
following measures:
1.
Reorient or relocate the receiving antenna.
2.
Increase the separation between the
equipment and receiver.
3.
Connect the equipment into an outlet
on a circuit different from that to which
receiver is connected.
4.
Consult the dealer or experienced ra-
dio/TV technician for help.
2
WARNING
Changes or modifi cations not expressly ap-
proved by the manufacturer could void the
user's authority to operate the equipment.
CAUTION
Exposure to Radio Freqency Radiation.
Antenna schall be mounted in such a man-
ner to minimize the potential for human con-
tact during normal operation. The antenna
should not be contacted during operation to
avoid the possibility of exceeding the FCC
radio frequency exposure limit. The mini-
mum separation distance of 20 cm from the
antenna to the body of user required.