Managing Several C'n'c Devices - Blaupunkt Hamburg MP68 Mode D'emploi

Press the OK button
u
menu item.
Switch between the settings with the
u
rocker switch or
•
"MIX AUX"
•
"MIX AUX"
Press the OK button
u
ferent function, or press the DIS•ESC
;
button to exit the menu.

Managing several C'n'C devices

Note
This setting is omitted if the current soft-
ware of this device does not yet offer any
C'n'C support.
When using suitable adapter cables, you
can connect up to 3 C'n'C Blaupunkt inter-
faces to the device. For the device to distin-
guish the different interfaces, you can as-
sign them individual device numbers.
Press the MENU button
u
Press the rocker switch
u
the "Syst" system menu.
Press the rocker switch
u
the "C'N'C EDIT" menu item is selected.
Press the OK button
u
menu item.
The menu displays the 3 C'n'C devices "DE-
VICE 1" to "DEVICE 3".
Select a device with the rocker switch
u
:
or .
Press the OK button
u
2
to call up the
:
.
: On.
: Off.
2
to select a dif-
6
.
:
to open
:
or until
2
to call up the
2
.
You can now enter the four-digit PIN number
of the device:
Enter the number sequence by press-
u
ing the corresponding buttons of the
9
keys .
Note:
The PIN of a C'n'C device consists of
4 hexadecimal digits. Every digit can
take on 16 different values from 0 to 9
and A to F. To enter the values from A to
F for a digit, press the "2" or "3" button
of the keys as often as required.
After entering one digit, the device auto-
matically switches to the next one. To cor-
rect any entry errors, select the correspond-
ing digit by pressing the rocker switch
:
or again.
After entering the complete PIN number,
press the OK button
u
AUX mode
2
.
39