Switching The Reg Function; Switching The Af (Alternative Frequencies); Adjusting The Seek Tuning Sensitivity; Selecting The Programme Type And Starting Seek Tuning - Blaupunkt HANNOVER 570 DAB Notice D'utilisation

Radio mode | Navigation
Switching the REG function (regional
Some RDS stations divide their programmes into region-
erent contents at certain times.
If the REG function is activated, the car sound system
changes only to those alternate frequencies of the set
station on which the same regional programme is being
broadcast.
Press the REG button to switch the REG function
.
If the REG function is switched on, REG is displayed
in white.

Switching the AF (alternative frequencies)

If the AF function is activated, the car sound system auto-
matically tunes into the best receivable frequency for the
station that is currently set.
Press the AF button to switch the AF function on
.
If the AF function is switched on, AF is displayed in
white.

Adjusting the seek tuning sensitivity

The seek tuning sensitivity decides whether the auto-
nds only strong stations or
also weaker stations that may be noisy.
Press the LO or DX button to adjust the sensitiv-
ity of station seek tuning.
If LO is displayed, only stations with a strong signal
are found during seek tuning.
If DX is displayed, stations with a strong and weak
signal are found during seek tuning.
Selecting the programme type and
starting seek tuning
You can select a programme type with the PTY function
to purposefully search for stations, for example, that
broadcast rock music or sport events.
Press the button to display additional operat-
ing options.
Press the PTY button to display the programme
types.
Scroll through the list with
the desired programme type to select it.
Press the PTY button to start PTY seek tuning.
If a station broadcasts a programme with the select-
ed programme type, this station is played back.
28
In the reception region Europe, an FM station can iden-
cally switched through, even if the car sound system is
currently not in radio mode.
Press the TA
on, TA is displayed in white.
Navigation
(only for devices with navigation)

Loading navigation data

The navigation software and map data are located on a
microSD card. For devices with navigation, the device is
delivered with the microSD card in the microSD card slot.
To be able to use the navigation, the microSD card must
be inserted in the card slot.
Important note:
The card reader supports microSD cards on which
stored. The microSD card for the navigation may not
Open the cover
ton.
Insert the microSD card with its labelled side to the

Download of map data

To ensure that you have the latest version of the map data
when you purchase the device, you have 30 days from
rst GPS positioning to download the latest version
of the map data once and free of charge to the standard
microSD card from the Internet at www.naviextras.com.
You can always purchase map material from this site at
a later time.
Important note:
If the microSD card is lost or damaged, the naviga-
tion map license associated with the card will be lost.
In this case, the license must be purchased anew with
/ and tap on
a new microSD card.
c
c announcements via an RDS signal. If priority for
c report is automati-
.
c announcements is switched
les or navigation data can be
les besides the navigation data.
underneath the rotary/pushbut-
6
8 until it clicks into place.
c
rst