ETNA KI560ZT Mode D'emploi page 38

OPERATION
When the time is set, it will begin to countdown immediately.
▷
The display will show the remaining time.
▷
An alarm will sound for 30 seconds.
▷
4. Simultaneously touch the minus (-) and plus (+) key to cancel the timer.
The timer display will show '--'.
▷
Using the cooking timer
1. Switch on the hob.
2. Touch a slider of the cooking zone you want to set the timer for.
3. Set the time by touching the minus (-) or plus (+) timer key.
Touch the minus (-) or plus (+) key once will decrease or increase by 1 minute.
▷
Touch and hold the minus (-) or plus (+) key will decrease or increase by 10 minutes.
▷
▷ As long as the time is flashing in the display it can be adjusted.
▷ When the time is set, it will begin to countdown immediately.
The display will show the remaining time.
▷
The red dot next to the power level display will illuminate, indicating the cooking zone is
▷
linked to the timer.
When the cooking timer expires, the corresponding cooking zone will be switched off
▷
automatically.
▷ An alarm will sound for 30 seconds and the timer display shows '--'.
Changing preset cooking time
Cooking time can be changed anytime during the operation.
1. Touch the slider from the cooking zone of which you want to adjust the timer.
The illuminated point next to the power level flashes.
▷
Be aware of tapping on the right position of the slider so the power level will
▷
not be changed.
2. Touch the plus '+' or minus '-' timer key.
The time indication in the timer display is flashing.
▷
If the time is not modified within 5 seconds since touching the plus '+' or minus '-' timer
▷
key, the timer is keeping the countdown before the adjusting operation.
3. Touch the plus '+' or minus '-' timer key to change the cooking time.
EN 16