Installing the Appliance
Have a technician install and connect the appliance
according to the enclosed Installation Instructions.
,
WARNING:
Do not install the appliance:
▯
outdoors,
▯
in an environment subject to drips of water,
▯
in rooms with risk of frost.
Transporting
The appliances are heavy and must be secured during
transportation and installation.
Because of the weight/dimensions of the appliance
and to minimize the risk of injuries and damage
to the appliance at least two people are necessary
to set-up the appliance securely.
Installation Location
A dry, well-ventilated room is suitable as
an installation location. The installation location
should not be exposed to direct sunlight or placed
near a heat source, e.g. a cooker, radiator, etc.
If installation next to a heat source is unavoidable, use
a suitable insulating plate or observe the following
minimum distances from the heat source:
▯
1.2" (3 cm) to electric or gas cookers.
▯
12" (30 cm) to an oil or coal-fired cooker.
The floor of the installation location must not give
way; if required, reinforce floor. To ensure that the Ice
Maker functions correctly, the appliance must be
upright.
6
Ventilation
The refrigeration unit is ventilated only via
the ventilation grille in the base. Never cover
the ventilation grille or place anything in front of it.
Otherwise the refrigeration unit must work harder,
increasing the power consumption.
Scope of Delivery
After unpacking all parts, check for any damage
in transit.
If you have any complaints, please contact the dealer
from whom you purchased the appliance or our
Customer Service department.
The following parts are included:
▯
Built-in appliance
▯
Interior fittings (depending on model)
▯
Bag containing installation materials
▯
Operating Instructions
▯
Installation Instructions
▯
Customer Service Booklet
▯
Warranty enclosure
▯
Information on the energy consumption and
noises.