Installation; Guide Of Customer; Select A Best Location; Duct Mount Instruction - mundoclima MUPO-H8 Manuel D'installation

Installation

Guide of customer

●The customer should have a qualified power supply coincident with that printed on
the tag of the air conditioner.
●Must use special circuit and efficient grounding outlet matching with the plug of the
air conditioner.
●The appliance should be installed in accordance with national wiring regulation.
●The plug should be easily accessible after installation.

Select a best location

1.Install the mobile air conditioner in a flat
and spacious location where the air outlets
will not be obstructed.
2.A minimum clearance of 50cm from walls
or other obstacles should be kept.
3.The gradient can't be more than 10 degrees
with the horizontal plane, while placing
and using the unit.
Uneven ground may cause additional noise or
vibration, or lead to damage to the unit.
Note: 1.The air conditioner shall not be used in the laundry.
2.The plug shall be accessible after the unit is positioned.

Duct mount instruction

·In cooling, heating and drying mode, the exhaust duct needs to be installed while in
fan mode, the exhaust duct is not needed.
·According to the actual needs, the exhaust duct can be moderately compressed and
tensed, but cannot be arbitrarily stretched and bent.
·The exhaust duct can be connected with Windows or installed into the wall.
Based on accessories of the unit you buy and the actual needs, you can make the
installation.
1. Install the adaptor A and adaptor B(
as shown in Fig.A or Fig.B .
(Be used to install to the window)
Fig.A
flat mouth or round mouth
( flat mouth)
or
(Be used to install to the wall (only for some units))
48
) onto the e xhaust duct
(round mouth)
Fig.B