mundoclima MUPO-H8 Manuel D'installation page 49

Installation
2. Connect the exhaust duct to the Air outlet connector on back of the unit. Slide-in the
adaptor A downwards until it is locked in place. (Fig.C)
Air outlet connector
adaptor A
Install the Window Slider Kit
1.Cut the foam seal(adhesive type) to the proper length and attach it to the window sash.
2.Attach the window slider kit to the window sash. Adjust the length of the Window Slider
Kit: Loose the screw A to adjust the length of the Window Slider Kit, then tight the screw
when the length is suitable.
Note: the length of the Window Slider Kit is 67.5cm to 120cm.
or
Fig.C
Horizontal
Foam Seal A
window sash
Screw A
window
slider
kit
49
Vertical