Loading Cutlery And Dishes; Setting And Starting A Washing Programme - ZANKER KDT10012FK Notice D'utilisation

Loading cutlery and dishes

Refer to the supplied leaflet with examples of the
load of the baskets.
Hints and tips
• Do not put in the appliance items that can absorb
water (sponges, household cloths).
• Remove the remaining food from the items.
• Make soft the remaining burned food on the items.
• Put hollow items (cups, glasses and pans) with the
opening down.
• Make sure that water does not collect in containers
or in bowls.
• Make sure that cutlery and dishes do not bond to-
gether.

Setting and starting a washing programme

Starting the washing programme without
delay start
1. Activate the appliance. Make sure that the appli-
ance is in setting mode.
2. To set a washing programme, press the pro-
gramme button again and again until the related
programme indicator comes on.
3. Close the appliance door, the washing programme
starts automatically.
Starting the washing programme with delay
start
1. Activate the appliance. Make sure that the appli-
ance is in setting mode.
2. Set the washing programme.
3. Press the delay start button. The delay start indica-
tor comes on.
4. Close the appliance door. The countdown starts
automatically.
• When the countdown is completed, the washing
programme starts automatically. The delay start
indicator goes off.
The opening of the appliance door interrupts the
countdown. When you close the door, the count-
down continues from the point of interruption.
24
• Make sure that the glasses do not touch other
glasses.
• Put small items in the cutlery basket.
• Mix the spoons with other cutlery to prevent them to
bond together.
• When you put the items in the baskets, make sure
that the water can touch all surfaces.
• Put light items in the upper basket. Make sure that
the items do not move.
• Water droplets can collect on plastic items and non-
stick pans.
Cancelling the delay start
If the appliance door is open, and the countdown
has not started
1. Press the delay start button. The delay start indica-
tor goes off.
2. Start the washing programme.
If the appliance door is closed, and the countdown
operates
1. Open the appliance door.
2. Press the delay start button. The delay start indica-
tor goes off.
3. Close the appliance door. The washing programme
starts automatically.
Interruption of a washing programme
• Open the appliance door.
– The washing programme stops.
• Close the appliance door.
– The washing programme continues from the point
of interruption.
Cancelling the washing programme
If the washing programme has not started, you can
change the selection.
To change the selection while a washing programme
operates, it is necessary to cancel the programme.
1. Open the appliance door.