Technical Data; Environment Concerns - ZANKER KDT10012FK Notice D'utilisation

Problem
Dry water drop stains on glasses
and dishes.
The dishes are wet.
The dishes are wet and dull.

Technical data

Dimensions
Water supply pressure
1)
Water supply
Capacity
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
The rating plate on the inner edge of the appli-
ance door shows the electrical connection data.
If the hot water comes from alternative sources of
energy, (e.g. solar panels, photovoltaic panels

Environment concerns

The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
28
Possible cause
Rinse aid dosage is too low.
The detergent can be the cause.
You have set a washing pro-
gramme without drying phase or
with a decreased drying phase.
The rinse aid dispenser is empty.
Width
Height
Depth
Minimum
Maximum
Cold water or hot water
Place settings
and aeolian), use a hot water supply to decrease ener-
gy consumption.
health, which could otherwise be caused by
inappropriate waste handling of this product. For more
detailed information about recycling of this product,
please contact your local council, your household waste
disposal service or the shop where you purchased the
product.
Recycle the materials with the symbol
packaging in applicable containers to recycle it.
Possible solution
Increase the rinse aid dosage.
Use a different brand of detergent.
Let the door stay ajar for some mi-
nutes before you remove the
dishes.
Fill the rinse aid dispenser with
rinse aid.
818 - 898 mm
0.5 bar (0.05 MPa)
8 bar (0.8 MPa)
maximum 60 °C
596 mm
550 mm
12
. Put the