Washing Programmes - ZANKER KDT10012FK Notice D'utilisation

Activating the acoustic signals:
1. To activate the acoustic signals again, do steps (1)
through (4). The programme indicator (A) goes off
and the end indicator is off. The programme indica-
tor (B) continues to flash.

Washing programmes

Programme
1)
2)
1) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
2) This is the standard programme for test institutes. With this programme you have the most efficient use of water and energy
consumption for crockery and cutlery with normal soil. Refer to the supplied leaflet for test information.
Consumption values
Programme
20
Type of soil
Heavy soil Crockery, cutlery, pots
and pans
Normal soil Crockery and cutlery
Fresh soil Crockery and cutlery
Normal soil Crockery and cutlery
Use this programme to quickly rinse the dishes.
This prevents the remaining food to bond on
the dishes and bad odours to come out from
the appliance.
Do not use detergent with this programme.
Programme time (minute)
120 - 130
105 - 115
30
130 - 140
12
2. Press the programme button again. The end indi-
cator comes on. The acoustic signals are activated.
3. Deactivate the appliance to confirm.
Type of load
Prewash
Wash 70 °C
Rinses
Dry
Prewash
Wash 65 °C
Rinses
Dry
Wash 60 °C
Rinse
Prewash
Wash 50 °C
Rinses
Dry
Rinse
Energy (kWh)
1,8 - 1,9
1,6 - 1,8
0,8
1,0 - 1,1
0,01
Programme description
Water (litre)
19 - 21
19 - 21
9
13 - 14
4