Use Of Rinse Aid; Adjusting The Dosage Of Rinse Aid; Loading Cutlery And Dishes; Helpful Hints And Tips - ZANKER ZKV1530 Notice D'utilisation

It is normal that water overflows from the salt
container when you fill it with salt.
Make sure that there is no grain of salt outer of
the salt compartment. Salt which stays on the
tank for a while drills the tank. It is recommended to

Use of rinse aid

Caution! Only use branded rinse aid for
dishwashers.
Do these steps to fill the rinse aid dispenser:
1
3
5

Loading cutlery and dishes

Helpful hints and tips

Caution! Only use the appliance for household
utensils that are applicable for dishwashers.
2
4
Fill when the rinse aid in-
dicator ( B ) becomes
clear.
start a washing programme immediately after you fill
the salt container. This prevents of corrosion because
of spilled salt.
When you set electronically the water softener to level
1, the salt indicator light does not stay on.
Caution! Do not fill the rinse aid dispenser with
other products (e.g. dishwasher cleaning
agent, liquid detergent). This can cause damage to
the appliance.

Adjusting the dosage of rinse aid

Do not use the appliance to clean objects that can ab-
sorb water (sponges, household cloths, etc.).
The rinse aid dial is set at
the factory at position 3.
To increase or decrease
the dosage refer to 'What
to do if...'
25