Care And Cleaning; Troubleshooting - ZANKER ZKVS 1530 Notice D'utilisation

• Let the dishes become cold before you remove
them from the appliance. Hot dishes can be
easily damaged.

Care and cleaning

Warning! Before maintenance, deactivate the
appliance and disconnect the mains plug from the
mains socket.
Dirty filters and clogged spray arms decrease the
washing results.
Make a check regularly and, if necessary, clean them.
Cleaning the filters
1
3
To remove filters (B) and
(C), turn the handle
counterclockwise and re-
move. Pull apart filter (B)
and (C). Wash the filters
with water.

Troubleshooting

The appliance does not start or it stops during opera-
tion.
20
C
B
A
2
A
4
Remove filter (A). Wash
the filter with water.
• First remove the items from the lower basket,
then from the upper basket.
• There can be water on the sides and on the
door of the appliance. Stainless steel becomes
cool more quickly than the dishes.
D
A
5
Put filter (A) to its initial
position. Make sure that
it assembles correctly un-
der the two guides (D).
An incorrect position of the filters can cause bad
washing results and damage to the appliance.
Cleaning the spray arms
Do not remove the spray arms.
If the holes in the spray arms are clogged, remove re-
maining parts of soil with a thin pointed object.
External cleaning
Clean the appliance with a moist soft cloth.
Only use neutral detergents. Do not use abrasive prod-
ucts, abrasive cleaning pads or solvents.
Before you contact the Service, refer to the information
that follows for a solution to the problem.
6
Assemble filters (B) and
(C). Put them into posi-
tion in filter (A). Turn the
handle clockwise until it
locks.