Harness Buckle - Britax MARATHON Guide D'utilisation

BRITAX Child Safety, Inc.
5. Slide the head pad over
the harness adjuster and
attach the elastic straps to
the rear tabs.
6. Attach the hook and loop
fasteners on the head
pad around the harness
straps.

Harness Buckle

If your child eats and drinks while in the child seat, you will
need to check the buckle periodically and rinse out any
accumulated debris.
Removing the Harness Buckle
1. Lift the cover from the
seat to find the buckle
strap connection.
2. Remove the buckle strap
by turning the buckle
retainer sideways and
routing it out of the front
buckle slot in the child
seat.
3. Slide the end of the belly
pad out from over the
foam pad on the seat.
38
4. Pull the end of the belly
pad and buckle retainer
out of the slot in the cover
to remove.
5. Turn the buckle retainer
sideways and route the
buckle assembly out of
the belly pad.
Replacing the Harness Buckle
1. Turn the buckle retainer
sideways and route it
through the fabric strip on
the belly pad.
2. Route the belly pad and
buckle retainer through
buckle slot in the cover.
– Ensure that the buckle
is through the correct
cover slot for the buckle
position.
3. Slide the end of the belly
pad over the comfort
foam on the child seat.
4. Turn the buckle retainer
sideways and route it
through the front buckle
slot and then into the
desired buckle position
(see page 22).
– Ensure that the buckle
is in the correct buckle
position.
5. Replace the cover.
MARATHON Canadian User Guide
1
3
4
39