Güde GTB 16/605 Traduction Du Mode D'emploi D'origine page 26

ENGLISH
22
Technical Data
Bench drill
Art. No
Mains voltage
Mains frequency
Safety class
Motor power
Spindle stroke
Spindle speed
Number of steps
Reach
Drill chuck range
Drill chuck cone
Spindle receiver
max. Drilling capacity in steel
Diameter of bench
Base plate WxD
Diameter of columns
Length of connecting cable
Type of cable
Length
Width
Height
Net/gross weight
Geräuschangaben
Sound pressure level L
Sound power level L
Wear ear protectors!
The numerical values given are emission levels and
not necessarily safe working levels. Although there
is a correlation between the emission levels and the
acceptable exposure levels, they cannot be reliably
used to determine whether or not any additional
safety measures are necessary. The characteristics
of the work space, other sources of noise, i.e. the
number of machines and other processes running
in the vicinity and so on, are all factors that can in-
fluence the actual exposure levels of the employees.
Moreover, the acceptable exposure levels can vary
from country to country. This information should
enable the machine's operator to carry out a better
assessment of the risks and hazards.
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties.
pA
WA
Read and understand the operating
instructions before using the
appliance. Familiarise with the
GTB 16/605
55202
230 V
50 Hz
I
600 W
60 mm
630 - 2700 min
5
125 mm
1 - 16 mm
B 16
MK 2
16 mm
200 x 210 mm
235 x 355 mm
60 mm
1,8 m
H05VV-F
540 mm
270 mm
850 mm
31 / 32 kg
58 dB (A)
71 dB (A)
The operator is responsible for accidents or risks to
third parties.
Persons over 16 years of age can only work on the
appliance. An exception includes youngsters trained
in order to reach knowledge under supervision
of the trainer during occupational education.
In case of any doubts about connection and operati-
on refer please to our customer center
Specified Conditions Of Use
Bench drilling machine for light and medium drilling
work in wood, metals and plastics.
The machine may only be used in a technically
perfect condition and taking into account all safety
information.
Do not use this product in any other way as stated
for normal use. Not observing general regulations
in force and instructions from this manual does not
make the manufacturer liable for damages.
GTB 16/612 R+L
55204
400 V
50 Hz
I
600 W
60 mm
630 - 2700 min
-1 -1
5
125 mm
1 - 16 mm
B16
MK 2
16 mm
200 x 210 mm
225 x 345 mm
60 mm
1,8 m
H05VV-F
540 mm
270 mm
850 mm
31 / 32 kg
63,4 dB (A)
76,3 dB (A)