Güde PRO 1100 A Traduction Du Mode D'emploi D'origine page 18

ENGLISH
14
EC-Declaration of Conformity
GÜDE GmbH & Co. KG
Birkichstrasse 6, 74549 Wolpertshausen
Deutschland
We, hereby declare the conception and construction
of the below mentioned appliances correspond - at
the type of construction being launched - to appro-
priate basic safety and hygienic requirements of EC
Directives. In case of any change to the appliance not
Plunge pump
PRO 1100 A #75800
PRO 2200 A #75805
PRO 2201 S #75810
Appropriate EU Directives
2006/95 EG, 2004/108 EG
Harmonised standards used
EN 55014-1:2006 + A1:2009
EN 55014-2:1997 + A1:2001 + A2:2008
EN 61000-3-2:2006 + A1:2009 + A2:2009
EN 61000-3-3:2008
EN 50366:2003 + A1:2006
EN 60335-1:2002 + A11:2004 + A1:2004 + A12:2006 +
A2:2006 + A13:2008 + A14:2010
EN 60335-2-41:2003 + A1:2004 + A2:2010
Inspection and maintenance plan
Time interval
As needed
After 12 months
Failures – causes - removal
Failures
Engine does not start
Pump does not suck
water pumped
Güde Schmutzwasser-Tauchpumpen_final.idml 14
Description
Cleaning and rinsing out
Oil change
Causes
No power supply.
Blocked pump wheel
Floating switch in shutdown position
Water level too low
Blocked pump wheel
The crusher wheel is dirty
Water level quickly drops down
Maximum head of delivery exceeded
Broken piping
PRO 1100 A | PRO 2200 A | PRO 2201 S
Wolpertshausen, 2012-01-13
Technical documentation
Any other details
5 10 W - 40, max 100 ml
Removal
Check the voltage
Visually inspect the pump wheel for foreign
objects
Check the water level
S
Remove the obstruction
Clean the crusher wheel
Check the transport line
Check the transport line
Helmut Arnold
Managing Director
Joachim Bürkle
13.01.12 16:44