Parker Hiross StarlettePlus SPS026-ES Manuel D'utilisation page 12

English
5.4 Cycling menu
Parameter table "CYC"
Code Defi nition
MOd ON = energy saving enabled
OFF = energy saving disabled
For choosing the set proceed as follows (or see the fl ow chart):
esc
set
Press buttons and toghether to enter on submenu.
Using buttons and select "Par" and press
Using buttons and select "CYC" and press
set
It appears the code " MOd" press to confi rm.
Using buttons and change the value and press
esc
Press to exit.
5.5 Alarm menu
Parameter table "ALL"
Code Defi nition
ALC relay alarm/warning
OFF = relay energised for alarms/warnings
ON = relay energised only alarms
For choosing the set proceed as follows (or see the fl ow chart):
esc
set
Press buttons and toghether to enter on submenu.
Using buttons and select "Par" and press
Using buttons and select "ALL" and press
set
It appears the code " ALC" press to confi rm.
Using buttons and change the value and press
esc
Press to exit.
set esc
Default Min Max.
esc
ON ON OFF
Par
set
set
to confi rm.
esc
set
to confi rm.
set
CF9
to confi rm.
set
Default Min Max.
ALC
ON - -
esc
ON
set
to confi rm.
set
to confi rm.
esc
set
to confi rm.
VER
set
esc
1.0
SPS026 / SPS100-ES
Flow Chart
PASS
esc
ON MOd
set
set
TIME
ALL
set
esc
esc
dOFF
CHd
set
set set
esc
esc
esc
ON 120
rE
SOFt
set
set
esc
esc
esc
1 0
5.6 Alarms/Warnings
Warnings
When a warning is ON, the "warning code" fl ashing on display.
When the nominal conditions return, automatically the warning code dis-
appears.
Alarms
esc
When an Alarm is ON, the "Alarm code" fl ashing on display together the
alarm symbol , the block of the machine depending on the severity
fo the alarm.
CYC For multiple alarms only the last condition appears on the display.
set
Alarms/Warnings Table
Name Code Description alarm / warning
dON
H - Warning High Dew point
L - Warning Low Dew Point
set
ER01 Warning evaporator sensor fault /dis-
P1
connected
ER03 Warning pressure transducer fault/
P3
disconnected
5
HdP ER07 Alarm High Dew point
LdP ER08 Alarm Low Dew Point
EXT ER11 Alarm external (remote)
Alarm High pressure
Aldi - Alarm High Compressor Discharge
Temperature
SUP
A=Automatic; M=Manual.
esc
set
Press the button for a few seconds to reset manually, the alarm
code and the alarm symobl
Alarm History
In order to see which and how many alarms have occurred you have to
follow the following sequence (or see the fl ow chart):
OFF
In alarm/warning situation.
set
Press to enter on "ALHi".
Press to choose "AL" and press
Press and to see the alarms.
esc
Press to exit.
4 / 6
Reset Dryer
A ON
A ON
A ON
A ON
M OFF
A OFF
M OFF
M OFF
must disappear.
set
to enter.