Quick-Release Axles On Rear Wheel - Quickie Xenon2 SA Notice D'utilisation

5.0 Quick Release Wheels

Quick-release axles on rear wheel

The rear wheels are equipped with quick-release axles. The wheels can
thus be installed or removed without using tools. To remove a wheel, simply
depress the quick-release button on the axle and pull the wheel off the axle.
(Fig. 5.1).
Quick release for quads/tetraplegics
Please flip up the release lever (1). The take out the quick release axles and/
or the wheels.
When the wheels/quick release axles have been put on the chair again,
please flip the release lever down.
Please do always ensure that the release mechanism is closed and fully
locked before starting to use the wheel chair (Fig. 5.2).
WARNING!
• Hold the quick-release button on the axle depressed when inserting
the axle into the frame to mount the rear wheels. Release the button to
lock the axle in place. The quick-release button should snap back to its
original position.
• Risk of injury. Do not get your fingers caught in the rotating wheel.
Always stop wheel rotation before removing the wheels.
XENON 2 SA
17
Fig. 5.1
Fig. 5.2
1
Rev.1.0