EUROM Safe-t-Shine 1200 Manuel D'utilisation page 19

When the heater is returned to its upright position, it will resume functioning as
normal but, before reusing, switch off, unplug and check for damage. Do not use the
heater if it is damaged or malfunctioning, but have it inspected/repaired!
Cleaning and Maintenance
Keep the heater clean. Dust, dirt and/or deposits in the heater are a common cause
of damage or faults! So these should be removed regularly. Switch off the heater,
remove the plug from the socket and allow the heater to cool down before cleaning or
carrying out maintenance work.

Wipe the outside of the heater regularly with a dry or slightly damp cloth. Do not
use aggressive soaps, sprays, cleaners or abrasives, waxes, polishes or
chemical solutions!

Using a vacuum cleaner, carefully remove any dust and dirt from the grills. Be
careful not to touch or damage any internal parts during cleaning!

The heater contains no other parts which need maintenance.

At the end of the season, store the cleaned heater in the original packaging if
necessary. Store it upright in a cool, dry and dust-free place.

Do not dispose of heater with household waste when it becomes worn or
damaged beyond repair. Take it to your local authority's collection point for
electrical appliances where any reusable materials will be collected and
redistributed.
CE-statement
Euromac bv., Genemuiden-NL hereby declares that the EUROM quartz heater,
type Safe-t-Shine 1200, complies with the LVD guideline 2014/35/EU and the EMC
guideline 2014/30/EU and meets the following standards:
EN 60335-1:2012+A11:2014
EN 60335-2-30:2009+A11:2012
EN 62233:2008
RoHS 2011/65/EU
Genemuiden, 17-05-2016
W.J. Bakker, alg. dir.
EN 55014-1:2006+A1:2009+A2:2011
EN 55014-2 :1997+A1:2001+A2:2008
EN 61000-3-2:2014
EN 61000-3-3:2013
19