Transportation, Storage And Disposal; Technical Data - McCulloch M46-120RE CLASSIC Manuel D'utilisation

M53-150AWR CLASSIC,
M53-174ARE CLASSIC)
If the drive feels slow, it is necessary to adjust the clutch
wire.
1. To increase the drive speed, turn the adjuster screw
counterclockwise.
Note: If the drive is engaged when you do not pull
the drive bail, it is necessary to extend the clutch
wire.
2. To extend the clutch wire and decrease the drive
speed, turn the adjustment screw clockwise. (Fig.
43)
If the drive feels slow also after the adjustment, let an
approved service agent replace the drive belt.
To adjust the clutch wire
(M46-120RE CLASSIC, M53-174WRE
CLASSIC)
If the drive feels slow, it is necessary to adjust the clutch
wire.
Transportation and storage
• For storage and transportation of the product and
fuel, make sure that there are no leaks or fumes.
Sparks or open flames, for example from electrical
devices or boilers, can start a fire.
• Always use approved containers for storage and
transportation of fuel.
• Empty the fuel tank and the carburetor bowl before
you put the product in storage for a long period of
time. Discard the fuel at an applicable disposal
location
• Safely attach the product during transportation to
prevent damage and accidents.
• Keep the product in a locked area to prevent access
for children or persons that are not approved.
Engine
Brand
3
Displacement, cm
Speed, rpm
867 - 004 - 03.12.2018

Transportation, storage and disposal

Technical data

1. Attach the clutch wire in different holes on the drive
bail to adjust the length of the clutch wire. Decrease
the length of the clutch wire to increase the drive
speed. Extend the clutch wire to decrease the drive
speed. (Fig. 44)
Note: If the drive is engaged when you do not pull
the drive bail, it is necessary to extend the clutch
wire.
2. For small adjustment of the drive speed, turn the
adjuster screw. To increase the drive speed, turn the
adjuster screw counterclockwise. To decrease the
drive speed, turn the adjustment screw clockwise.
(Fig. 45)
If the drive feels slow also after the adjustment, let an
approved service agent replace the drive belt.
• Keep the product in a dry and frost free area.
Disposal
• Obey the local recycling requirements and applicable
regulations.
• Discard all chemicals, such as engine oil or
antifreeze, at a service center or at an applicable
disposal location.
• When the product is no longer in use, send it to a
McCulloch dealer or discard it at a recycling location.
• Discard the battery at a service center or discard it at
a disposal location for used batteries.
M46-120RE CL M51-150AWR
ASSIC CLASSIC
McCulloch McCulloch
120 150
2900 2900
M53-150AWR
CLASSIC
McCulloch
150
2900
15