Agilent Technologies Turbo-V 2300 Rack Controller Notice De Mode D'emploi page 238

17 Technical Information
Use
Where:
If YES is selected, the Soft Start mode allows the pump to rump-up
the Normal speed within ten steps. When NO is selected, the Soft
Start mode is deselected and the rump-up of the pump will be done
within 360 seconds.
The controller is factory set to YES.
The Soft Start mode may be deselected/selected only when the pump is
NOTE
stopped.
S
S
Figure 20
P
Select the type of purge gas, the default is air. Argon can be selected
if needed.
238/262
XXX = YES or NO
Press CYCLE NUMBER push-button to select YES or NO
O F T S
E L E C T
Press the PUMP CURRENT push-button and the display shows:
R O C E S
A
Turbo-V 2300 Rack Controller User Manual / 87-901-022-01 (B)
T A R T
I O N :
Turbo V 2300
Turbo-V 3K-T
S G A S
R G O N
M O D E
Y E S
?