Wheel And Engine; Suspension; Adjusting The Front Suspension; Locking The Suspension On The Fork - Wayscral ANYWAY E-200 Notice D'utilisation

VIII.

Wheel and engine

After the first month of use, it is advisable to tighten your spokes to limit the impact of the engine traction
on your rear wheel. You may hear a light noise when starting the engine. This noise is normal because the
engine starts and assists pedalling. This noise can get louder when in full use.
IX.

Suspension

1.

Adjusting the front suspension

To adjust the front suspension level, you can turn the barrel adjuster on the left side of your fork by half
turn. You will hear a click after each half turn. Keep doing this until you get the right level of suspension.
Reduce hardness
2.

Locking the suspension on the fork

Turn the right blue dial clockwise to lock the suspension and counter-clockwise to unlock. It is best to lock
the suspension on flat and unlock it on rougher routes.
Unlock
X.

Kickstand

Before using the bicycle, make sure that the kickstand is definitely folded up.
49
Increase hardness
Lock