Texas 335 – 532 Manuel De L'utilisateur page 7

Storage
Follow the procedure mentioned below when the machine is kept unused for a long period.
Change oil on engine.
Check that you can see the oil when
the engine is placed in a horisontal position.
Drain the remaining of the gasoline from the fuel tank, start the engine and let it run until the residue of
fuel in the carburettor has been used up and the engine stops.
Pour a few drops of engine oil through the spark plug hole and then screw spark plug in after turning
crankshaft a few times. Pull the starter handle slowly until you feel compression and leave it.
Clean the body with oily rags.
Wrap the engine with plastic sheet and store it at a dry place.
Interval
Check points
Check engine oil
Change engineoil
Cleaning air filter element
Cleaning of spark plug
and adjusting gap
Adjustment of tappet
Decarboning cylinder,
cylinderhead, piston
Fitting valves
(1) We recommend oil change after the 2 first hours use, hereafter every 10 hours.
(2) In case engine is used under very dusty conditions, clean air cleaner once a day or every 5
working hours.
(3) Ask your dealer to do those jobs.
Maintenanceplan of engine
Before each use Every 25
working hours
X
X
(1)
X
(2)
Every 50
working hours
X
7
Annual
servicing if
necessary
X
(3)
X
(3)
X
(3)