Environmental Protection; Installation Requirements; Ambient Conditions - Häfele DT 700 Instructions De Montage Et De Maintenance

2.7 Environmental
protection

3. Installation requirements

3.1 Ambient conditions

Unauthorised persons
WARNING
Danger to life for unauthorised persons due to hazards in the danger
zone and working area!
Unauthorised persons who do not meet the requirements described herein
will not be aware of the occupational hazards. Therefore, unauthorised per-
sons are subject to risks of serious injury or death.
• Keep unauthorised persons away from the danger zone and working
area.
• When in doubt, approach persons and have them clear the danger
zone and working area.
• Interrupt the work until unauthorised persons have left the danger zone
and working area.
NOTE
Risk to the environment due to improper handling of environmentally
hazardous substances!
Improper handling of environmentally hazardous substances, particularly
improper disposal, can cause significant damage to the environment.
• Always follow the notes below for handling environmentally hazardous
substances and their disposal.
• If environmentally hazardous substances are accidentally released
into the environment, immediately take appropriate action. When in
doubt, notify the appropriate local authority of the damage and check
for appropriate measures to be taken.
The following environmentally hazardous substances are used:
Batteries
Batteries contain toxic heavy metals. They are subject to special waste treatment
and must be handed into municipal collection points or disposed of by a specialist
company.
Electric and electronic components
Electric and electronic components may contain toxic materials. These components
must be collected separately and be deposited at municipal collection points or dis-
posed of by a specialist company.
In addition to the ambient conditions specified here, the instructions in the chapter
entitled "2.1 Correct purpose of use" in the operating instructions also apply.
NOTE
The product may be damaged if it is installed under the wrong ambient
conditions!
Please note the following with regard to product installation:
> on external doors
> in damp environments
> in the vicinity of electromagnetically sensitive devices
> in potentially explosive environments
19