Choice Of Location; Installation Of The Drive Units - Truma Mover SR Instructions De Montage Et Mode D'emploi

Version 2

Masquer les pouces Voir aussi pour Mover SR:

Mode d'emploi (7 pages)

Les langues disponibles

5. AL-KO Vario III / AV

Installation kit

For caravans with AL-KO Vario III / AV Chassis (frame thick-

ness less than 2,8 mm) mandatory, part no. 60010-21500.

Fig. 12

6. AL-KO Chassis M adapter kit

for chassis with axial displacement with a permitted

gross weight of 1800 kg

Mounting set for compensating for frame edges for caravans

with AL-KO Chassis M. Mounting set is needed for mounting

in front of the axle,

part no. 60030-38600.

Fig. 13

7. AL-KO Chassis M

adapter kit for chassis with a continuous frame and a

permitted gross weight of 1900 kg to 2000 kg

Mounting set for compensating for frame edges for caravans

with AL-KO Chassis M. The mounting set is needed for

mounting in front of the axle,

part no. 60031-02000

Fig. 14

8. Mover® mounting set for Eriba-Touring,

part no. 60030-09000.

Fig. 15

Installation is not possible in some cases because of at-

tachments to the underbody. Contact your dealer if

necessary.

9. Eriba Troll Mounting Set

The Eriba Troll Mounting Set allows the Mover® to be mount-

ed behind the axis on an Eriba Troll caravan/trailer.

part no. 60031-03000

Fig. 16

Detailed installation instructions are provided with the

relevant mounting set.

The Mover® SR is not approved for installation on

caravans / trailers with any other chassis!

No holes may be drilled into or welding work performed on

the vehicle frame (except when using the low chassis kit* and

the Eriba-Touring mounting set). Under no circumstances re-

move any suspension components from the chassis.

* In the case of the AL-KO Vario III / AV Chassis, never drill

into the vehicle frame even if the flat frame kit is used.