Stihl RE 143 Notice D'emploi page 46

English
pencil jet, e. g. from the rotary
nozzle. Maintain a sufficient
distance between the high-
pressure hose and the surface
when cleaning to avoid any
damage to the surface being
cleaned.
The trigger on the spray gun
must move easily and return
automatically to its starting
position when released.
Hold the spray attachment
firmly with both hands in order
safely to withstand the
kickback force and additional
torque produced when using
spray attachments with an
angled spray lance.
Do not buckle or loop the high-
pressure hose.
Ensure that the connecting
cord and the high-pressure
hose are not damaged by
being driven over, squashed
or pulled; protect them against
heat and oil.
Do not touch the connecting
cord with the high-pressure
jet.
If the machine is subjected to
a strain for which it was not
designed (e. g., heavy impact
or a fall), always check that it
44
is in good condition before
continuing work - refer also to
the chapter "Before starting
work". Also make certain that
the safety mechanisms are
working properly. Never
continue using a machine that
is not in perfect working order.
In case of doubt, have the unit
checked by your servicing
dealer.
Before leaving the machine
unattended: Switch off the
machine – unplug the power
plug.
Safety equipment
When the safety equipment is
activated, excessive pressure
is returned to the intake side
of the pump via a safety valve.
This safety feature has been
set by the manufacturer and
must not be adjusted.
After finishing work
Switch off the
machine before
leaving it!
Unplug the power plug
–
from the socket
Disconnect water intake
–
hose between machine
and water supply
Never unplug the power plug
by pulling on the connecting
cord: always grip the plug
itself.
Maintenance and repairs
WARNING
Before starting any
work on the
machine: Always
disconnect the
machine from the
mains power
supply.
Use only high-quality
–
spare parts. Otherwise,
there may be a risk of
accidents and damage to
the unit. If you have any
questions in this respect,
consult a servicing dealer.
To avoid risks, work on the
–
machine (e. g. replacing a
damaged power cord) may
only be carried out by
authorized dealers or
qualified electricians.
RE 143, RE 143 PLUS, RE 163, RE 163 PLUS