Description - ALFRA ROTABEST 80SP RL-E Mode D'emploi

dEScRiPTiOn

The magnetic core drilling machine can be attached to ferromagnetic work pieces using the installed
mechanically switchable permanent magnet. For this purpose, the magnetic lever must be pressed
downwards and the safety tab must latch into place correctly. The motor can be turned on and off using
the large switch on the side. A self- adjusting linear guide which the motor is attached to, can be
vertically adjusted using the rotary handle. The model- plate and an attachment possibility for the
allen wrench included can be found on the back of the machine.
E
F
C
J
39,21 76,29
A) Driving Motor
B) Rotary Handle
C) Motor Switch
D) Magnetic Base
E) MT 3-Arbor
F) Screws for Adjusting Slide
G) Allen Screws for Adjusting
the Motor's Stroke Range
185
373,5
H) Lever for Magnet
I) Safety Tab
J) Recess for Safety Belt
K) Power Cord
L) Right / Left Switch
M) Rotation Speed Control
A
G
K
M
L
H
I
D
B
88
95
205
252
Rotabest 80SP RL-E
15