switel WTF737 Mode D'emploi page 61

Confirmation signal
The confirmation signal is issued on releasing the P button. This signals to the
caller that you have ended transmission.
Activating/Deactivating the confirmation signal
35
10 x M
X/Y, P
Key tone on/off
11 x M
X/Y, P
Dual−channel monitoring
It is possible to monitor a second channel with CTCSS/DCS code in addition to the
currently set channel with CTCSS code.
Activating dual channel monitoring
12 x M
X/Y, M
X/Y, M
X/Y, M
Both channels are scanned for signals. If an active channel is detected, the dual−
channel scan stops. Channel scanning is resumed when no signal has been transmit-
ted on the channel for five seconds.
Press the P button to enable radio communication on this channel.
Deactivating dual−channel monitoring
12 x M
X/Y OF , P
Key lock
The key lock function prevents inadvertent modification of settings.
a M
a M
The P and C buttons are not locked against use.
Operating the Walkie−Talkies
Activate programming mode
Select ON / OF and confirm it
Activate programming mode
Select ON / OF and confirm it
Select dual−channel monitoring
Select the 2nd channel and confirm it
Select the CTCSS code for the 2nd channel and
confirm it
Select the DCS code for the 2nd channel and
confirm it
Select dual−channel monitoring
End dual−channel monitoring
Activate the key lock function
Deactivate the key lock function
61