JUKI MO-6904C Manuel D'utilisation page 12

141023
1. So as to avoid electric shock hazards, do not open the cover of the electrical box of
1. To prevent possible personal injury, never operate the machine with the belt cover
2. To protect against possible personal injury resulting from being caught in the motor,
3. To avoid electric shock hazards, never operate the machine with the ground wire for
4. During operation, be careful not to allow your or any other person's head, hands or
5. So as to avoid possible injury to your hands and fi ngers, do not put any of them near
6. To prevent possible injury to your hands and fi ngers, do not put any of them inside
7. To avoid electric shock hazards and accidents arising from damaged electrical
8. So as to protect against possible personal injury resulting from abrupt start of the
9. In the event of a power failure, be sure to turn OFF the power to the machine to
10. So as to protect against possible personal injury resulting from abrupt start of the
11. Before inspecting, adjusting or cleaning the machine, threading the machine head or
12. Be careful of handling this product so as not to pour water or oil, shock by dropping,
In addition, be aware that the safety devices such as the "eye protection cover" and "fi nger
guard" are sometimes omitted in the sketches, illustrations and fi gures included in the Instruction
Manual for the explanation's sake. In the practical use, never remove those safety devices.
FOR SAFE OPERATION
the motor or touch any part inside the electrical box with the power to the machine
turned ON.
and the eye guard removed.
use a motor that is provided with a motor pulley cover.
the power supply removed.
fi ngers to come close to the handwheel, V belt and motor so as to prevent possible
personal injury that may occur when your hands/fi ngers are caught in the machine.
Also, do not place anything close to them.
the cloth cutting knife and the needle when turning the power to the machine or while
the machine is in operation.
the eye guard while the machine is in operation.
components, be sure to turn OFF the power switch before inserting/detaching the
power plug.
machine, make sure to turn OFF the power to the machine when you leave your machine.
protect against possible personal injury resulting from abrupt start of the machine.
machine, remove the belt cover, motor pulley cover and the V belt after turning OFF
the power to the machine and confi rming that the sewing machine will not run even
by depressing the start pedal.
replacing the needle, so as to protect against possible personal injury resulting from
abrupt start of the machine, be sure to turn OFF the power to the machine so as to
prevent an accident and confi rm that the sewing machine will not operate even when
depressing the foot pedal of the sewing machine.
and the like since this product is a precision instrument.
CAUTION
x