Power Management Function; Hints And Tips - Zanussi ZEI6740BBA Notice D'utilisation

Masquer les pouces Voir aussi pour ZEI6740BBA:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

of the timer for 4 seconds.
Deactivate the hob with
To override the function for only one
cooking time: activate the hob with
comes on. Touch
Set the heat setting in 10 seconds. You can
operate the hob. When you deactivate the hob
with
the function operates again.

Power management function

• Cooking zones are grouped according to the
location and number of the phases in the
hob. See the illustration.
• Each phase has a maximum electricity
loading of 3700 W.
• The function divides the power between
cooking zones connected to the same
phase.
• The function activates when the total
electricity loading of the cooking zones
connected to a single phase exceeds 3700
W.

Hints and tips

WARNING!
Refer to Safety chapters.
Cookware
For induction cooking zones a
strong electro-magnetic field creates
the heat in the cookware very
quickly.
Use the induction cooking zones
with correct cookware.
Cookware material
• correct: cast iron, steel, enamelled steel,
stainless steel, the bottom made of multi-
layer (with correct mark from a
manufacturer).
• not correct: aluminium, copper, brass,
glass, ceramic, porcelain.
Cookware is correct for an induction hob
if:
• some water boils very quickly on a zone set
to the highest heat setting.
• a magnet pulls on to the bottom of the
cookware.
www.zanussi.com
comes on.
.
.
of the timer for 4 seconds.
• The function decreases the power to the
other cooking zones connected to the same
phase.
• The heat setting display of the reduced
zones changes between two levels.
The bottom of the cookware must be
as thick and flat as possible.
Cookware dimensions
Induction cooking zones adapt to the dimension
of the bottom of the cookware automatically to
some limit.
The cooking zone efficiency is related to the
diameter of the cookware. The cookware with a
smaller diameter than the minimum receives
only a part of the power generated by the
cooking zone.
Refer to "Technical information"
chapter.
The noises during operation
If you can hear:
• crack noise: cookware is made of different
materials (sandwich construction).
• whistle sound: you use the cooking zone
with high power level and the cookware is
made of different materials (sandwich
construction).
• humming: you use high power level.
• clicking: electric switching occurs.
9

Publicité

Table des Matières
loading

Table des Matières