Power Function - Zanussi ZEI6740BBA Notice D'utilisation

Automatic Heat Up
Activate this function to get a desired heat
setting in a shorter time. When it is on, the zone
operates on the highest setting in the beginning
and then continues to cook at the desired
heating setting.
To activate the function the cooking
zone must be cold.
To activate the function for a cooking
zone: touch (
touch a desired heat setting. After 3 seconds
comes on.
To deactivate the function: change the heat
setting.

Power function

This function makes more power available to the
induction cooking zones. The function can be
activated for the induction cooking zone only for
a limited period of time. After this time the
induction cooking zone automatically sets back
to the highest heat setting.
Refer to "Technical information"
chapter.
To activate the function for a cooking
zone: touch .
To deactivate the function: change the heat
setting.
Timer
Count Down Timer
You can use this function to set how long the
cooking zone should operate for a single
cooking session.
First set the heat setting for the cooking zone
then set the function.
8
comes on). Immediately
comes on.
To set the cooking zone: touch
again until the indicator of a necessary cooking
zone comes on.
To activate the function or change the
time: touch or
time (00 - 99 minutes). When the indicator of
the cooking zone starts to flash slowly the time
counts down.
To see the remaining time: set the cooking
zone with . The indicator of the cooking zone
starts to flash quickly. The display shows the
remaining time.
To deactivate the function: set the cooking
zone with and touch
counts back to 00. The indicator of the cooking
zone goes out.
When the time comes to an end, the
sound operates and 00 flashes. The
cooking zone deactivates.
To stop the sound: touch
Minute Minder
You can use this function as a Minute Minder
when the hob is activated and the cooking
zones do not operate. The heat setting display
shows .
To activate the function: touch
or of the timer to set the time. When the
time comes to an end, the sound operates and
00 flashes.
To stop the sound: touch
The function has no effect on the
operation of the cooking zones.
The Child Safety Device
This function prevents an accidental operation
of the hob.
To activate the function: activate the hob
with . Do not set the heat setting. Touch
of the timer for 4 seconds.
Deactivate the hob with
To deactivate the function: activate the hob
with . Do not set the heat setting. Touch
again and
of the timer to set the
. The remaining time
.
. Touch
.
comes on.
.
www.zanussi.com