Child Safety Device; Power Management; Hints And Tips - Zanussi ZEI6840FBA Notice D'utilisation

Set the heat setting first.
To activate the function: touch
for 4 seconds.
To deactivate the function: touch
previous heat setting comes on.
When you deactivate the hob, you also
deactivate this function.

CHILD SAFETY DEVICE

This function prevents an accidental operation of
the hob.
To activate the function: activate the hob with
. Do not set the heat setting. Touch
seconds. comes on. Deactivate the hob with
.
To deactivate the function: activate the hob with
. Do not set the heat setting. Touch
seconds. comes on. Deactivate the hob with
.
To override the function for only one cooking
time: activate the hob with
Touch for 4 seconds. Set the heat setting in
10 seconds. You can operate the hob. When you
deactivate the hob with
again.

HINTS AND TIPS

WARNING! Refer to Safety chapters.
COOKWARE
For induction cooking zones a strong
electro-magnetic field creates the heat
in the cookware very quickly.
Use the induction cooking zones with
suitable cookware.
Cookware material
• correct: cast iron, steel, enamelled steel,
stainless steel, multi-layer bottom (with a correct
marking from a manufacturer).
• not correct: aluminium, copper, brass, glass,
ceramic, porcelain.
Cookware is suitable for an induction hob if:
24
. comes on
. The
for 4
for 4
. comes on.
the function operates

POWER MANAGEMENT

• Cooking zones are grouped according to the
location and number of the phases in the hob.
See the illustration.
• Each phase has a maximum electricity loading of
3300 W.
• The function divides the power between
cooking zones connected to the same phase.
• The function activates when the total electricity
loading of the cooking zones connected to a
single phase exceeds 3300 W.
• The function decreases the power to the other
cooking zones connected to the same phase.
• The heat setting display of the reduced zones
changes between two levels.
• water boils very quickly on a zone set to the
highest heat setting.
• a magnet pulls on to the bottom of the
cookware.
The bottom of the cookware must be
as thick and flat as possible.
Ensure pan bases are clean and dry
before placing on the hob surface.
Cookware dimensions
Induction cooking zones adapt to the dimension of
the bottom of the cookware automatically.
The cooking zone efficiency is related to the
diameter of the cookware. The cookware with a
diameter smaller than the minimum receives only a
part of the power generated by the cooking zone.
Refer to "Technical data".