Installation; Connection Cable; Before The Installation - Zanussi ZEI6740BBA Notice D'utilisation

Installation

WARNING!
Refer to Safety chapters.

Before the installation

Before you install the hob, write down the
information bellow from the rating plate. The
rating plate is on the bottom of the hob.
Serial number ...........................
Built-in hobs
Only use the built-in hobs after you assemble
the hob into correct built-in units and work
surfaces that align to the standards.
Assembly
min.
500mm
www.zanussi.com

Connection cable

• The hob is supplied with a connection cable.
• To replace the damaged mains cable use
min.
50mm
min.
2mm
the following (or higher) mains cable type:
H05V2V2-F T min 90°C. Speak to your local
Service Centre.
13