To deactivate the function: set the cooking
zone with
and touch
counts back to 00. The indicator of the cooking
zone goes out.
When the time comes to an end, the
sound operates and 00 flashes. The
cooking zone deactivates.
To stop the sound: touch
Minute Minder
You can use this function as a Minute Minder
when the hob is activated and the cooking
zones do not operate (the heat setting display
shows
).
To activate the function: touch
or
of the timer to set the time. When the
time comes to an end, the sound operates and
00 flashes.
To stop the sound: touch
The function has no effect on the
operation of the cooking zones.
Lock
You can lock the control panel while cooking
zones operate. It prevents an accidental change
of the heat setting.
Set the heat setting first.
To activate the function: touch
comes on for 4 seconds. The Timer stays on.
To deactivate the function: touch
previous heat setting comes on.
When you deactivate the hob, you
also deactivate this function.
The Child Safety Device
This function prevents an accidental operation
of the hob.
To activate the function: activate the hob
with
. Do not set the heat setting. Touch
for 4 seconds.
comes on. Deactivate the
hob with
.
24
. The remaining time
.
. Touch
.
.
. The
To deactivate the function: activate the hob
with
. Do not set the heat setting. Touch
for 4 seconds.
comes on. Deactivate the
hob with
.
To override the function for only one
cooking time: activate the hob with
comes on. Touch
heat setting in 10 seconds. You can operate
the hob. When you deactivate the hob with
the function operates again.
Power management function
• Cooking zones are grouped according to the
location and number of the phases in the
hob. See the illustration.
• Each phase has a maximum electricity
loading of 3700 W.
• The function divides the power between
cooking zones connected to the same
phase.
• The function activates when the total
electricity loading of the cooking zones
connected to a single phase exceeds 3700
W.
• The function decreases the power to the
other cooking zones connected to the same
phase.
• The heat setting display of the reduced
zones changes between two levels.
.
for 4 seconds. Set the
www.zanussi.com