Heating And Cooking - Bartscher 610.836 Mode D'emploi

Heating and cooking

1. Prior to turning the microwave oven on, check that the rotating tray
⑥
ring are properly installed. The cooking chamber must be clean; the rotating
⑥
ring must be located in the depression; the rotating tray
⑤
the tray drive
2. Place the dish with food product on the rotating tray. Nothing should extend beyond
the edge of the rotating tray. Do not heat / cook food products placed directly on the
rotating tray. In the event of heating / cooking larger quantities of food cut into
pieces, ensure they are evenly distributed throughout the dish used for cooking and
that they do not touch one another.
CAUTION!
Never activate the device without the rotating tray and a container for food products,
nor without food products!
3. Close the door and check that the seals are clean and door is closed properly.
4. Set the desired power level and cooking time (1-30).
NOTE!
The device comes on when the cooking time is set!
Cooking time depends on the following characteristics of the food product:
Initial temperature:
Thickness:
Moisture:
Form:
Weight:
5. The cooking chamber is lit, and the rotating tray rotates. Ensure the rotating tray has
a free range of movement.
6. To suspend the device's operation, open the door.
- 32 -
.
the lower the initial temperature, the longer the cooking time
the thicker the food product, the longer the cooking time
the drier the food product, the longer the cooking time
the more compact the food product, the longer the cooking time
the heavier the food product, the longer the cooking time
⑦
and rotating
⑦
must be secured to