Bosch 8 Série Notice D'utilisation page 45

Display flashes.
The temperature in the freezer compartment was
too warm.
Appliance is not cooling, display and lighting are lit.
Showroom mode switched on.
Automatic super freezing does not switch on.
It is too warm or too cold in the cool-fresh compartment.
The standard setting has been set too high or low
(e.g. frost in the cool-fresh compartment).
--------
When button alarm has been pressed, the warmest
temperature reached in the freezer compartment is
displayed for 5 seconds. Press the alarm button.
The display stops flashing.
Start the appliance self-test.
~ "Appliance self-test" on page 46
When the programme has ended, the appliance
switches over to normal operation.
The appliance decides independently whether auto-
matic super freezing is required and switches it on or
off automatically.
You can set the temperature in the cool-fresh com-
partment to be 3 settings warmer or colder. If the
temperature in the refrigerator compartment is set
to setting 0, the cool-fresh compartment has a tem-
perature of around 0 °C.
Press and hold the refrigerator
1.
compartment super button until the display tem-
perature refrigerator compartment flashes.
Press ¾ / ¿ button to change the setting.
2.
Setting –3 corresponds to the coldest setting.
Setting +3 corresponds to the warmest setting.
The selected setting is saved after one minute.
Faults – what to do? en
45