Publicité
Les langues disponibles
Les langues disponibles
Warning against cutting injuries
Warning against cutting injuries
Keep distance of persons
Any damaged or disposed electric or
electronic devices must be delivered to
appropriate collection centres.
Protect against humidity
This side up
General Power Tool Safety Warnings/
Metal Band Saw
Warning
Operation is only allowed with a safety switch against
stray current (RCD max. stray current of 30mA).
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
Consider the environment influences!
Do not expose the machine to rain. Do not use the
machine in a moist or wet environment. Provide
adequate lighting. Do not use the machine near
flammable liquids or gases.
Keep other persons in a safe distance!
Do not let other persons, especially children, touch
the machine and the cable. Keep them in a sufficient
distance from the place of your work.
Provide adequate clothing.
Do not wear any loose clothing and jewels. They could
get caught by the moving parts of the machine. Fur-
ther, we recommend wearing safety shoes, protective
glasses and ear protectors when working with the
machine. Long hair must be adequately protected.
Store the machine properly!
Machines not being used must be kept in a dry and
locked place, inaccessible to children.
Do not overload the machine!
Work within the specified power range.
Use the right machine!
Do not use the machine for purposes for which it has
not been Designed.
Take care of your machine!
Comply with the servicing regulations and instruc-
tions. At regular intervals, check the machine cable
and have it replaced by an authorised professional if
damaged. At regular intervals, check the extension
cable and replace it if damaged. Keep the handles dry,
with no oil and grease.
Be careful!
Pay attention to what you are doing. Work reasonably.
Do not use the machine when you are tired.
WARNING
Using any other accessory equipment may represent
a risk of a serious injury for you.
Watch out for the feeder cable.
Do not pull the cable. Do not use it to pull the plug
out. Keep the cable out of reach of thermal sources,
oil and sharp edges.
Have your machine repaired by an expert only!
This machine meets the applicable safety provisions.
Any repairs may only be executed by an expert, using
original spare parts; otherwise, the user could face a
risk of injury.
Children and persons not familiarised with the ma-
chine and persons with limited physical, sensory and
mental skills must not use the machine.
Additional safety instructions Metal
Band Saw
Use the right saw band at all times.
The device must be switched off before inserting ma-
terial to be cut in the vice or before removing material
to be cut from the vice.
Keep your hands and fingers in a safe distance from
the running saw band at all times.
The saw band must not be braked by hand.
Safety equipment and guards, etc. must not be
removed.
Never remove the cuts by hand. Use a brush at all
times.
Never leave the device when in operation.
ENGLISH
15
Publicité
