♦
The second knob, labeled volume, controls the volume of haze produced. The range is
from 0% ~ 100% of maximum output.
♦
The yellow TIMER button controls the timer function. Depress the button to activate. When
activated the yellow light will turn on. Adjusting the interval knob will determine the time
between haze output (10 ~ 250 seconds). The duration of output is set at 15 seconds. The
volume can be adjusted using the volume knob to control the amount of haze produced.
♦
The red CONTINUOUS button sets the machine to constant haze production. To activate
this function, depress the red button. The volume knob can be used to regulate the volume
of the steady stream of haze produced.
♦
The green MANUAL button will produce a continuous blast at maximum volume while the
button is held down. When released, the manual function stops and the machine will return
to the previous setting; timer; continuous; or stationary.
♦
Note: the Continuous function will override the Timer function. Therefore, if both buttons
have been depressed the Fazer will haze continuously. The manual function overrides all
functions. When depressed and held down the Fazer will haze at maximum volume for as
long as the button is held down, regardless of the machine's setting at the time.
Fazer Liquid
The Z-300II Fazer machine operates on regular fog liquid. The machine has been designed to
produce exceptional haze using ANTARI fog liquids. Use only ANTARI fog liquids or other dealer
recommended fog fluids. Failure to use high quality fog liquid can damage the machine.
Do not use liquids designed only for Hazer machines. The Fazer can operate using only fog fluids
or
fluids recommended by your dealer that are designed to be used exclusively in the Antari Z-300II
Fazer.
Do not allow the Fazer liquid to become contaminated. Contamination includes adding fragrances,
oils, dust, or any other foreign materials to the Fazer liquid supply. Always replace the caps on the
fog liquid container and the Fazer's liquid tank immediately after filling.
Save these instructions
4