Télécharger Imprimer la page

Mesto FERROX PLUS 3565P Mode D'emploi page 13

Masquer les pouces Voir aussi pour FERROX PLUS 3565P:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18
GB
IRL
Repairs and modifications to the tank are not permitted.
The effect of the safety valve must not be bypassed or made inoperative.
Contact between spraying device materials and hydrogen peroxide or other agents
that give off oxygen may result in increased pressure similar in nature to an
explosion. Never place such agents in the device.
Have damaged parts or parts that do not work properly repaired immediately by our
customer service department or by service partners authorized by us.
Avoid ignition sources in the environment if you spray combustible liquids.
Do not allow the device to remain under pressure and/or exposed directly to
sunlight. Make certain the device is not heated beyond the maximum operating
temperature (→Table 1 below).
Never blow through the nozzles or valves with your mouth.
Use only MESTO spare and accessory parts.
We cannot assume any liability resulting from the use of third-party parts.
Wear suitable protective equipment when working with hazardous substances.
When pumping, always observe the pressure gauge to ensure the maximum
spraying pressure is not exceeded (→ Table 1 below).
Before filling, after use and before maintenance work, allow the residual pressure in
the tank to dissipate completely (→ Section "After Use", Section 1).
Scope of delivery
Tank [1], with pump [2] and spare parts pouch [3], spray line [4], instructions for use [5],
carrying strap [6], spray lance [7]. (Figures 1a and 1b)
You will find the illustrations referred to above in the front fold-out pages 3 – 5 of these
Instructions for Use.
Technical data
Device family
Type
Max. filling amount
Total contents
Max. spraying pressure
Max.
operating
erature
Weight when empty
Material of tank
Where device is carried
Technical residual
quantity
Max. volume flow
Recoil force
Table 1
AUS
FERROX PLUS
3565P
6 l
9 l
temp-
4,7 kg
Steel with polyester coating
Shoulder
USA
NZ
3585P
10 l
13 l
6 bar (87 psi)
40 ° C (104 ° F)
5,2 kg
Back
0,03 l
0,78 l/min
< 5 N
13
CDN
INOX PLUS
3595P
3615P
6 l
9 l
4,2 kg
4,7 kg
Stainless steel
Shoulder
Back
IND
10 l
13 l

Publicité

loading

Ce manuel est également adapté pour:

Ferrox plus 3585pInox plus 3595pInox plus 3615p