Soehnle Professional 3020 Mode D'emploi page 45

English
3.2.8 Assigning and clearing the consecutive number
3.2.9 Item counter
3.2.10 Print-command keys
3.2.11 Displaying the current totals
3.2.12 Display options with the Info key
2 2 0
Every input in the total memory is assigned a 4-digit consecutive number.
The consecutive number is not reset to the factory setting when the total
memory is cleared.
Optionally, you can default resetting the consecutive number in Setting mode:
- deactivated (no reset = factory setting)
- when the Clear Total key is pressed.
- when the appliance is switched off.
The item counter only counts operations that are actually totalised.
The item counter is incremented by 1 each time a new operation is selected by
pressing the F key or an automatic totalisation takes place. The item counter
runs up to 999, then comes an error message. The item counter is automatically
zeroed when the total is cleared.
The Info and F keys can execute voucher printout.
This is dependent on whether a print template was assigned to the key in
question.
During a totalising operation, you can display the totals reached by pressing the
Info key and then the F key.
When you press the Info key, you have the following options:
F = Displays the current content of the total memory
Tare key = Displays the current tare weight