Wolf FWS-2-60L Instructions De Montage page 39

Electrical connection configuration
for a non-high-efficiency pump
Setting the DHW circulation
shut-off temperature
HE pump PWM signal
3064928_201607
Installing the BSP-ZP DHW circulation
module
=
2
Set the temperature select screw (A) to the required temperature.
DHW circulation is disabled when the shut-off temperature is reached.
The temperature set on the DHW circulation unit (A) must be at least
Note
10 K below the DHW temperature of the freshwater module to prevent
DHW circulation from operating continuously.
Observe all national codes for drinking water hygiene.
~ ~
1
M
3
~
3.
39