Yamaha Breeze Manuel Du Propriétaire page 239

5. Clean the oil strainer with solvent.
6. Inspect the O-ring and replace it if damaged.
7. Install the O-ring, oil strainer, compression
spring and drain bolt. Tighten the drain bolt to
specification.
cC
Before installing the drain bolt, be sure to
install the O-ring, compression spring and
oil strainer.
Tightening torque:
Drain bolt (engine):
32 Nm (3.2 m0kgf)
8. Fill the engine with oil and install the dipstick.
8-17