Handling The 3D Glasses; On Cleaning; Disposal Of The Unit; Recommendation To Use More Than One Unit - Sony LMD-2451MT Instructions D'utilisation

To prevent any of the above issues, we recommend
reducing brightness slightly, and to turn off the power
whenever the unit is not in use.

Handling the 3D Glasses

• Do not touch the lens surface of the 3D glasses.
• Do not leave the 3D glasses in ambient high-
temperature, such as near heating equipment or inside
a car.
• Do not put extra pressure on the 3D glasses to avoid
them becoming misshapen.
• Make sure hard accessories or buckles not to touch the
lens surface of 3D glasses while holding or
transporting.
• Avoid wearing the 3D glasses when they are aging,
breaking or being damaged. Tiny scratches on the lens
surface may interfere with your viewing enjoyment.
Laying down or looking away from the screen will
lessen the 3D effect or shifts image colors.

On Cleaning

Before cleaning
Be sure to disconnect the AC power cord from the AC
outlet.
On cleaning the monitor and 3D glasses
A material that withstands disinfection is used for the
front protection plate of the medical use LCD monitor.
The protection plate surface is specially treated to
reduce light reflection, as are the 3D glasses. When
solvents such as benzene or thinner, or acid, alkaline or
abrasive detergent, or chemical cleaning cloth are used
for the protection plate surface/monitor surface, the
performance of the monitor may be impaired or the
finish of the surface may be damaged. Take care with
respect to the following:
• Clean the protection plate surface/monitor surface/3D
glasses with a 50 to 70 v/v% concentration of
isopropyl alcohol or a 76.9 to 81.4 v/v% concentration
of ethanol using a swab method. Wipe the protection
plate surface gently (wipe using less than 1 N force).
• Stubborn stains may be removed with a soft cloth such
as a cleaning cloth lightly dampened with mild
detergent solution using a swab method and then clean
using the above chemical solution.
Never use solvents such as benzene or thinner, or acid,
alkaline or abrasive detergent, or chemical cleaning
cloth for cleaning or disinfection, as they will damage
the protection plate surface/monitor surface.
• Do not use unnecessary force to rub the protection
plate surface/monitor surface with a stained cloth.
The protection plate surface/monitor surface may be
scratched.
• Do not keep the protection plate surface/monitor
surface/3D glasses in contact with a rubber or vinyl
resin product for a long period of time. The finish of
the surface may deteriorate or the coating may come
off.

Disposal of the Unit

Do not dispose of the unit with general waste.
Do not include the monitor with household waste.
Recommendation to Use more than
One Unit
As problems can occasionally occur for the monitor,
when the monitor is used for safety control of personnel,
assets or stable picture, or for emergencies, we strongly
recommend you use more than one unit or prepare a
spare unit.

On Repacking

Do not throw away the carton and packing materials.
They make an ideal container which to transport the
unit.
If you have any questions about this unit, contact your
authorized Sony dealer.

On Fan Error

The fan for cooling the unit is built in. When the fan
stops and the RETURN button on the front panel blinks
for fan error indication, turn off the power and contact an
authorized Sony dealer.

On Moisture Condensation

If the unit is brought directly from a cold place to a warm
place, or the unit is warm and the ambient temperature
cools suddenly (by air-conditioning, for example),
moisture may condense on the surface or inside of the
unit, or create a mist residue inside the protection plate.
This is called moisture condensation, and is not a
malfunction of the product itself, although it may cause
damage to the unit.
Leave the unit in a condensation free area.
If moisture condensation has occurred, turn off the unit
and do not use it until moisture condensation has
evaporated.
59
Precaution