File Management Functions (File Manag. Menu) - Viscount Sonus 60 Guide De L'utilisateur

User Guide
11. FILE MANAGEMENT FUNCTIONS
The Sonus series of organs is able to use two different types of mass memory: the internal memory, and a
data storage device for connection to the [USB] slot underneath the manuals (USB pen).
These data storage units are used to save the organ's set-up or parts of it, pieces of music and lists of pieces.
If the USB stick is connected, the system will use it as the mass memory. However, the internal memory can
still be used for copying files (from and to the USB pen), but it is not possible to load, delete and rename files
saved on the internal memory: the USB stick has to be removed before this can be done.
Selecting the FILE MANAGEMENT field in the main screen accesses the relative menu containing all the
file management functions. There is also a screen which provides information about the firmware versions
installed on the organ.
As the video page shows, the bottom of the screen identifies the memory unit currently in use:
- INTERNAL MEMORY
- USB STICK DRIVE
The functions available are as follows:
o DIR: displays the contents of the mass memory
o LOAD: file loading
o SAVE: saving of the set-up of the organ or parts of it in the mass memory.
o COPY: for copying files from one memory unit (e.g. internal) to another.
o RENAME: file rename.
o DELETE: file deletion.
o SONGLIST: programming of a list of pieces.
o O.S. INFO: display of the firmware versions installed in the system.
NOTES
- Once the USB pen is inserted please wait some seconds before displaying the FILE
MANAGEMENT menu.
- When using a computer to rename files stored on the USB pen, remember that names can only
contain numbers and letters, which must all be lowercase.
- Always use USB pens formatted with FAT or FAT32 file system (no NTFS).
Sonus 60 / 60
Viscount
(FILE MANAG. menu)
57
- 45 / 45 - 40 / 40
Dlx Dlx Dlx